background image

Connection to the mains supply

 

 
 
 
 

 

WARNING-

 THIS APPLIANCE MUST BE EARTHED 

 

This appliance is designed to operate from a mains supply of AC230V ~ 50HZ. 
Check that the voltage marked on the product corresponds with your supply voltage. 
This  product  is  fitted  with  a  13A  plug  complying  with  BS1363  and  is  fitted  with  an  appropriate  fuse 
complying with BS1362. Always replace the fuse with one of the same rating. If the plug is unsuitable for 
your mains socket or needs to be replaced, please note the following:  
Important: The wires in the mains lead must be connected as per the following diagram - 
 
 
                                                            
                                                          Always ensure that the plug cord grip is fastened correctly. 
 
 
 

 

If your appliance is supplied with a non-rewireable plug, you will find that it incorporates a fuse, the value 
of which is indicated either on the base of the plug or on the fuse carrier. Always replace the fuse with 
one of the same rating. If you need to remove the plug, cut it from the mains lead and dispose of it. Never 
attempt to re-use this plug or insert it into a socket outlet, as there is a very great risk of an electric shock.  

 

  
Rated voltage: AC 220V – 240V ~50/60Hz, 
Power consumption: 1850W – 2200W 
Capacity: 1.7 Litre  

Summary of Contents for G2S3002 P













Reviews: