Abocom Systems, Inc. .
User Manual
Revision 1.0 • June 27, 2011 - 10 -
3.1.2.2 Remove a profile
1.
Go to the Profile Management tab.
2.
Select the profile name in the Profiles List.
3. Click
Remove
.
Note:
The profile being used can’t be removed.
3.1.2.3 Switch another Profile
1.
Go to the Profile Management screen.
2.
Select the profile name required in the Profiles List.
3. Click
Activate
.
3.1.2.4 Export a Profile
1.
From the Profile Management screen, highlight the profile to export.
2. Click
Export…
, the Export Profile window will then appear below.
3.
Browse the directory to export the profile to.
4. Click
Save
. The profile should then be exported to the specified location.
3.1.2.5 Import a Profile
1. From the Profile Management screen, click
Import…
. Then the Import Profile will
appear below.
2. Browse to the directory where the profile is located.
3. Highlight the profile name.
4. Click
Open
, the imported profile will then appear in the Profiles List.
3.1.2.6 Scan Available Networks
1. Click
Scan
on the Profile Management screen, the Available Infrastructure and Ad
Hoc Networks window will appear below.
2. Click
Refresh
to refresh the list at any time.
3.
Highlight a network name and click
Activate
to connect to an available network. If no
configuration profile exists for that network, the Profile Management window will open
the
General
tab screen. Fill in the Profile name and click
OK
to create the
configuration profile for that network.
