Abocom MH1000, Quick Install Manual

Page: 9 / 23

STEP 10
﹒
Click on Policy on the left function menu and then click on
Outgoing from the sub-function list.
STEP 11
﹒
Click New Entry (Figure S-6)
STEP 12
﹒
At Add New Policy WebUI, enter the following information:
„
Source Address – Select “Inside_Any”
Destination Address – Select “Outside_Any”
Action: Select “PERMIT ”
„
Click OK
Figure S-6 Add New Policy Setting
STEP 13
﹒
If MH1000 access control function is being required, please refer to
Policy and Address to add some settings.
8