2
Hardware Installation
This chapter describes how to install the ECR500 ExpressCard to your
computer.
When you connect the ECR500 card to the PCI-Express Slot, the PC
Card has the ability of automatic sensing and operating on either speed
without manual reconfiguration.
1.
Hold the ExpressCard with wide connector toward the slot and the brand label
facing upward.
2.
Insert the ExpressCard and push it firmly into the ExpressCard slot of your
computer.
3.
Check the Power Led status is on, and then you can insert the memory card into
the ECR500 memory card slot.
Software Installation
Windows 2000/XP/2003 Installation
Windows 2000, XP and Server 2003 automatically detects and installs
the correct driver for the 5-in-1 ECR500 ExpressCard. No driver
installation is needed.
Figure2 Power LED