EN
20
Designations of the components shown (Figure A–D)
1.
Hydraulic gripper head
2.
Medium outlet
3.
Filler neck
4.
High-pressure hose
5.
Actuating lever
6.
Air bleed valve
7.
Cylinder
8.
Locking notch
9.
Chain
10. Handle
11. Medium discharge (dispensing system)*
12. Actuating lever (dispensing system)*
*Not included in the scope of delivery
Assembly/ Installation
The product is to be set up or installed at the intended use site under due
consideration of the following conditions:
•
At the location and site all applicable provisions of law must be clarified and
compliance with them assured.
•
The ground and space relations are to be clarified prior to set-up/installation of
the product in order to assure safe operation for the personnel and the product
long-term. The product must be set-up/installed so that safe, permanent
operation is assured.
