ABM International, Inc. Series: 1018, 1022 & 1026 V5.0
Model: Innova Longarm Quilting Machine Service Guide
Proprietary information of ABM INTERNATIONAL, Inc. furnished for customer use only.
No other uses are authorized without the prior written permission of
ABM INTERNATIONAL, INC.
14
9.0 ADJUSTING THE PRESSER FOOT HEIGHT
Foot height should be no less than 0.073”. NOTE: You may use (1) dime OR (1) nickel as a gage to
check height. Thicker materials may require the foot to be set higher.
1. Turn the hand wheel so that the presser foot moves to its lowest position.
2. Loosen presser bar clamp screw.
3. Set appropriate presser bar height. Be sure to keep needle centered in foot.
4. Tighten presser bar clamp screw.
5. Turn the hand wheel a few revolutions to ensure the presser bar does not interfere with the needle bar
crank.