Ablerex EnerSolis ES3000T, User Manual

Page: 9 / 25

16
2.5 Connecting to the Grid (AC utility)
CAUTION
:
An AC circuit breaker should be installed between the
PV inverter and the utility before wiring the unit to the
utility.
Step 1: Make sure that the utility voltage and utility frequency
meet the specifications of the PV inverter.
Step 2: Make sure the circuit breaker which connected to the
utility is opened before installed the PV inverter’s AC
output. The AC circuit breaker should be closed only
after completed the electrical installation of the PV
inverter.
Step3: As shown in Figure 2, remove the cover of AC
output. Follow the steps in Figure 3 to set the AC
output wiring by using the recommended wire
diameter. You can follow the instructions in Figure 4 to
adopt different wiring methods for the desired output
voltage.
17
Figure 2
Figure 3