Insert Batteries and Turn On
2
On
Exit Record Mode
5
OFF
RECORD
SWITCH
TOY/APPL.
Record a Series of Messages
4
Choose your Switch Color
1
Quickstart Guide:
BIG Step-by-Step™ and LITTLE Step-by-Step™
communicators
www.ablenetinc.com
Firmly, rotate the colored switch top counter-clockwise
to remove. Attach a new color by rotating the cap
clockwise until it stops.
A Snap Switch Cap is included with your BIG or LITTLE
Step-by-Step. Place a picture or symbol on the switch top,
and secure by snapping your Switch Cap over it.
Connect one 9-volt battery at the bottom of the device.
Rotate the Volume ON/OFF knob to turn the device on.
The LITTLE Step-by-Step includes a detachable Mounting
Base that must be removed to access the battery door.
Press the tab and slide to remove the base.
On
Press and Hold the switch top, begin speaking when you
hear a beep. Release when finished. Repeat for
additional messages in a sequence.
Note: RECORD Light will flash while recording.
Press and Release the RECORD button to exit Record
Mode. Your BIG or LITTLE Step-by-Step is ready for use.
NOTE: Depending on your model, your device will have either
2 minutes or 4 minutes of recording time. The RECORD light
will turn yellow and flash when only 10 seconds of recording
time remains.
Select Level / Enter Record Mode
3
Press and Hold,
then Release
OFF
RECORD
SWITCH
TOY/APPL.
Select Desired level (applicable models) using the Level
switch on the side of the device. Press and Hold the
RECORD button until the RECORD Light activates, then
release.
Press and Release
Repeat
Repeat
LITTLE/BIG Step-by-Step
TM
LITTLE/BIG Step-by-Step
TM
w/Levels
Levels switch
(applicable models)*
LITTLE Step-by-Step w/Levels shown
