Quick Start Guide Version 1.3
ABLELink
®
Ethernet Serial Server
SE5002
Copyright © 2006 Atop Technologies, Inc.
All rights reserved. Designed in Taiwan.
3
A Configuration
by
Telnet
1.
Telnet to SE5002 using DOS command “
Telnet IP_address
”. Example: telnet 10.0.50.100
2.
SE5002’s network, link mode and COM ports settings can be configured in the telnet window
B Configuration
by
SerialManager Utility
Use
SerialManager
on Product CD to configure the SE5002.First click”
Configuration
” then assign a
static IP.
C.
Configuration by Web Browser
1.
Make sure the PC is on the same network as SE5002
2.
Open a web browser, then Enter in the IP address as the SE5002. The default user name is
admin
and default password is
null (leave it blank)
.
3. The SE5002’s network, link mode and COM ports settings can be configured on different web
pages.
4. Click
“
Save Configuration
” to save settings.
5. Click
”
Restart
” button to initiate the change.
4 Pin
Assignments
The pin assignments of
DB9
connector on
SE5002
is shown in the following table:
Pin#
RS-232
Full Duplex
for
SE5002
Model
RS-485
2 wire, Half Duplex
for
SE5002
Model
RS-485/RS-422
4 wire, Full Duplex
for
SE5002
Model
1
DCD
N/A
N/A
2
RXD
N/A
(reserved)
TXD+
3
TXD
DATA+
RXD
+
4
DTR
N/A
N/A
5
SG (Signal Ground)
SG (Signal Ground)
SG (Signal Ground)
6
DSR
N/A
N/A
7
RTS
DATA-
RXD-
8
CTS
N/A(reserved)
TXD-
9
N/A
N/A
N/A
The pin assignments of
Terminal Block
connector on
SE5002-S55is
is shown in the following table:
Pin#
RS-485/RS-422
4 wire, Half Duplex
For
SE5002-S55is
RS-485
2 wire, Full Duplex
For
SE5002-S55is
1
T+ NC
2
T- NC
3
R+ Data+
4
R- Data-
5
SG (Signal Ground)
SG (Signal Ground)
Customer Services and Supports
1. Contact your local dealers or Atop Technical Support Center at the following numbers.
y
+886-3-550-8137 (Atop Taiwan)
y
+86-21-6495-6232 (Atop China)
2. Report the errors via Atop’s Web site or E-mail account
www.atop.com.tw
,
www.atop.com.cn
,
