manualshive.com logo in svg

ABLELink ABLELink SE5001, User Manual, Page: 48 / 67

Share
Download
ABLELink ABLELink SE5001 User Manual Download Page 48

User Manual Version 1.5 

SE5001 Ethernet Serial Server 

 

 

Copyright © 2006 Atop Technologies, Inc. 

All rights reserved. Designed in Taiwan. 

47 

Appendix B: Upgrade System Firmware 

After the new version of firmware is released, customers can download it from 

www.Atop.com.tw

 After one 

download the firmware, please follow these instructions listed below. 

B.1 Upgrade Procedures 

When one get a new software version, please follow the sequences below to upgrade ones SE5001. 

1.  Connect a PC (Windows 95/98/NT/2000/XP) and SE5001 one wish to upgrade the firmware in the 

same TCP/IP network. Use command 

ping

 or SerialManager program to verify their availability. 

2.  Prepare the download tool and press any key to edit its configuration file 

dapdl.cfg

. dapdl.cfg file 

can be found in the product CD. 

 

3 Edit 

the 

"dapdl.cfg"

 file to fit ones system need, the content of the file looks like as the following. 

Be sure to save ones modifications after the change is made. 

Remote_IP   10.0.50.100 

Load  

  U5001ap.hex 

The first line identifies the IP address of SE5001, the second line identifies the firmware (.Hex file) name to 
be downloaded. 

4 

Execute the utility program 

download.bat, 

it can be found in the product CD. 

5  Input the user name and password credential, the new firmware will be downloaded. 

 

6  SE5001 will automatically restart each time the firmware is successfully downloaded. 

 

 

Summary of Contents for ABLELink SE5001




































































Reviews:

No comments