2. Installation
5
1. Connect an Ethernet cable to the Ethernet port on the adapter.
2. Connect the other end of the Ethernet cable to your network hub, switch or
router.
The “LINK LED” should light up in green to indicate a proper physical connection
between the adapter and the network. If the LED doesn’t light up, please verify the
cable connection between all the network devices.
Verifying the Driver Installation on Windows
®
Once you finish the installation, you can open Windows
Device Manager
to verify if
your Ethernet adapter is properly installed. To access the
Device Manager
:
On Windows
®
Vista: Right-click
Computer
on the desktop and click
Properties
>
Device Manager
.
On Windows
®
7/ Windows
®
8: Right-click
Computer
on the desktop and click
Control Panel \ system and security
>
Device Manager
On Windows
®
XP: Right-click
My Computer
on the desktop and click
Properties
> (
Hardware
) >
Device Manager
.
In the
Network adapters
group, an item named
ASIX AX88772B USB2.0 to Fast
Ethernet Adapter
should be displayed.
If there is a question or exclamation mark next to that item, the driver is not properly
installed. Hence, please delete the item, select the
Delete the driver software
for this device
option (if provided), unplug the adapter from your computer, and
then repeat the installation steps.
NOTE:
Windows
®
8 has the driver installed for this adapter as default, and you do
not need to install it. The CD driver for Windows
®
8 is for back up only.
Summary of Contents for USB2E100W
Page 1: ...User s Manual USB 2 0 Ethernet Adapter...
Page 2: ......
