Setting up
Connecting the Power Supply
Plug the AC Power Supply into a suitable Mains Outlet Socket and Insert the
Jack Plug into the Power Connector at the Rear of the Printer. The LED will
light solid green to show that the Printer is powered on and idle.
What’s in the box?
1
●
Ap1310-DP-BTi Printer x1
●
Roll of 55mm Diameter Thermal Paper x2
●
RS-232 Data Cable (D9 <–> RJ12) x1
●
Universal Power Supply Adaptor with 4 region click-ins x1
(UK/Euro/USA/Aus)
●
Wall/Belt Mounting Kit x1
●
Quick Start Guide x1
Loading Paper
Slide the Lid Release Button forwards until the Lid springs open.
Unwind a small amount of paper from the roll and Insert the Paper Roll into the Printer.
Close the Lid down, and the paper is loaded.
Pressing the paper feed button when the printer is idle advances paper at typically 50mm per second, depending on
the battery voltage. However, the feed button has several additional functions:
A single press and release of the button:
●
In idle or spooling mode, advances paper.
“Double-clicking” the button:
●
character set.
●
In spooling mode, exits spooling mode and prints any stored data.
●
1
2
3
1
2
3
