| Installation –
Connecting the E3BWLAN
22
3
Use the installation tester and the vehicle simulation
adapter to conduct all other required checks.
N PE
L1 L2 L3
4
Replace the electronic components cover onto the
housing base and fix it into place with the screw you
removed in
Step 8
of section "Preparing and fixing
the wallbox in place" on page 16.
5
Hook the housing cover onto the upper edge of the
housing base and lock it using the housing cover key.
6
Use the vehicle simulation adapter to conduct a func-
tional test of the charging function.
N PE
L1 L2 L3
The installation of the Wallbox eMH2 is now complete and the wallbox is ready for operation.
Connecting the E3BWLAN
For integration into an existing WiFi network, any Controller wallbox can be retrofitted with the WiFi dongle
E3BWLAN
, which can be ordered separately as an optional accessory (see "Accessories" on page 10).
WARNING!
Installing the WiFi dongle
This manual only describes how to connect the
E3BWLAN
inside the wallbox and set up the communication
with a WiFi network (see from "Setting up data communication" on page 34), but not how to configure the
external WiFi network. Contact your network administrator for this task.
Connecting the WiFi dongle must be carried out by a qualified specialist electrical contractor.
