Assembly Instructions
Assembly Instructions
Stage 2 –
Connection to a TV
Stage 1 –
Fitting the Unit
fig. 6
fig. 7
fig. 8
1. Locate the RCA jet on the rear of
the console. Plug the 3 way cable
(RCA) into those 3 jets. Ensure
you connect the colour coded
cable to the corresponding
colours on the jets.
See fig. 6.
Connection to a T.V.
1. The Games Mat can be
connected to a T.V. via the scart
inlet or the T.V. R.C.A. sockets.
Ensure your T.V. is switched off
during connection.
Connection to the RCA outlet
1. Plug the 3 way cable (RCA) into
the three sockets on the front or
rear of your T.V. Ensure you
connect the colour coded cable
to the corresponding colours on
the socket.
See fig. 7.
2. When you turn on your T.V. select
the A.V. (Video) channel.
Connection to the Scart outlet
1. Plug the Scart Converter into the
scart socket on the back of your
T.V. Ensure you align the pins
correctly. Then plug the 3 way
colour coded cable to the
corresponding socket on the
converter.
See fig. 8.
2. When you turn on your T.V. select
the A.V. (Video) channel.
fig. 4
Comfort Adjustment
Adjusting the Axle Angle
-
Locate the LOCK on the left side
of the Middle Base and pull out.
Chose from 3 axle angles. Select
your desired position and release
LOCK.
See. fig. 4.
Adjusting the Height
-
Locate the little ball on the front
of the axle and press it down
with your thumb or a pencil
while pulling the wheel up to
above a second small ball,
which will lock the wheel in
position. Chose from 2 heights.
See. fig. 5.
fig. 5
LOCK
Little Ball
PDF compression, OCR, web optimization using a watermarked evaluation copy of CVISION PDFCompressor