Albert-Büttner-Straße 11
D-91207 Lauf / Pegnitz
Tel. +49 (0) 9123 188-0
Fax +49 (0) 9123 188-188
[email protected]
www.abl.de
ABL SURSUM
Bayerische Elektrozubehör GmbH & Co. KG
eMH3
WALLBOX
Quick start guide, version 03/2017, Article no. 0301471_b
EN
Important safety information
Please read the following safety information carefully and follow the instructions under all circumstances. You can find the detailed installation and operating
manual for your ABL wallbox here:
http://www.salto.no/for-installatorer/dokumentasjon
→
ABL/Salto Dobbel
SAFETY INFORMATION
This ABL wallbox represents the current state of technology and complies with all current technical safety requirements, guidelines and standards. Disregard of
or actions contrary to the safety information and instructions contained in the detailed manual and printed on the device may lead to electric shock, fire and/or
severe injury.
Malfunctions affecting the safety of persons, connected electric devices or the device itself must only be repaired by a qualified electrical contractor.
Contact ABL technical support if:
• the housing has been damaged mechanically,
• the housing cover has been removed or can no longer be closed or locked,
• sufficient protection against splashing water and/or foreign objects is obviously no longer evident,
• there is functional or visible damage to the charging socket or external charging cable,
• the wallbox does not function properly or has been otherwise damaged.
Please pay particular attention to the following points:
• Read this manual carefully, heed all warnings and follow all instructions.
• The wallbox must be installed, connected and approved for operation according to local regulations and conditions by a qualified specialist electrical contractor.
• Under no circumstances remove the protective cover of the electronic components behind the housing cover of the ABL wallbox. Cleaning or maintenance of
components behind this cover is not necessary, and must under no circumstances be performed by the user.
• Before charging, ensure that the housing cover is closed and lock it using the triangular key included.
• Only use accessories intended and sold for the device by ABL.
• Do not operate this wallbox in close vicinity to running water or water jets: However, the ABL wallbox is sufficiently protected against water splashes and
sprays according to the respective protection degrees.
• The wallbox must not be installed in areas subject to flooding.
• The wallbox must not be installed in explosive atmosphere areas (EX areas).
• The wallbox must not be covered with stickers or other objects or materials so that sufficient air circulation is ensured at all times.
• No liquids, or objects or receptacles containing liquids must be placed on the housing.
• Please note that operating a radio transmitter in the immediate vicinity (< 20 cm) of the wallbox may lead to malfunctions and should therefore be avoided.
Operating status display – wallbox
The two indicator LEDs on the housing cover show the current operating status of the eMH3 wallbox. During normal operation, the following operating states are
shown:
DESCRIPTION
flashes for 5 sec.
off
The wallbox is ready for operation, the vehicle may be connected for charging at any time.
illuminated
off
The vehicle is connected and has been detected. Next, the charging procedure will start automatically.
off
illuminated
The vehicle is currently being charged.
off
flashes for 2 sec. Charging is complete, the wallbox can be unplugged from the vehicle.
