background image

  

iii

Contents

Contact                                                                                        ii

Safety and Operating Notices                                              1

Safety Notices in this Manual                                                   1

Safety notices on the device                                                     1

General safety information                                                       2

Operating instructions / Maintenance                                                         3

Introduction                                                                    5

Product description                                                                   5

Identifying your product variant                                               6

Package contents and unpacking                                                                    7

Available accessories                                                                7

Installation and power supply connection                                         9

Prerequisites for the mounting site and installation               9

Preparation and mechanical installation                                              10

Electrical installation of your charging station                      11

Taking into operation and charging procedure                               14

Safety information for taking the charging station  

into operation                                                                          15

Normal operation                                                                     15

Charging procedure                                                                 16

Resolving errors                                                             17

Operating states                                                                      17

Error messages during operation with the vehicle              18

Summary of Contents for eMH1 WALLBOX



































Reviews: