19
System
Instructions
After booting up, the server will automatically enter the Login interface of the IP PA
Intercom-based System. In this case, you need to manually enter the account and password
(
The default administrator account and password: admin. You can add an operator after
logging in the administrator account, and the operator has no setting permissions.
)
to log in the IP PA Intercom-based System.
For remote login control, you can use another
computer to open a browser program (It is required to log in through the Firefox browser
for remote login on other computers, while the IE browser does not support login.) under
the same network, enter the IP address:
192.168.10.100:9999 (the server's default IP)
in the address bar to access the IP PA Intercom-based System, and then enter the account
and password for login.
System
Login
After Login, the interface is as shown below:
Main
Interface
1
2
3
4
