3-12 Chapter
3
USB 2.0 Controller
This item allows you to select the USB ports to be USB 2.0 ([Enabled]) or USB 1.1
([Disabled]) specification.
USB Keyboard Support
This item allows you to select [
BIOS
] for using USB keyboard in DOS environment,
or [
OS
] in OS environment.
USB Mouse Support
This item allows you to select [
BIOS
] for using USB mouse in DOS environment, or
[
OS
] in OS environment.
AC97 Audio
When set to [
Enabled
], the onboard audio codec will be detected and supported. IF
you want to use audio adapter other than the one onboard, set this item to [
Disabled
]
Onboard LAN Controller
This item enables or disables the onboard LAN controller.
Onboard LAN Boot ROM
When set to [
Enabled
], this item allows the system to boot from network by the
onboard LAN controller boot ROM.
Init Display First
Two options are available: PCI Slot and AGP. The default setting is
AGP
.
When you
install an additional display card, you can choose either a PCI display card or an AGP
display card to activate the display boot-up screen.
POWER ON Function
This item allows you to select which way you want your system to power on. Seven
items are available: Password
Hot Key
Mouse Left
Mouse Right
Any
Key
BUTTON ONLY
Keyboard 98. The default setting is
BUTTON ONLY
.
NOTE:
The mouse wake up function can only be used with the PS/2 mouse, not with
a mouse that uses the COM port and USB connection.
Mouse Left
(
Mouse Right
)
means you need to double click the mouse
left
(
right
) button, for the computer to
power on. You also need to note the compatibility issue with your PS/2 mouse. Some
PS/2 mice cannot wake up the system because of compatibility problems. Also, if the
specs of your keyboard are too old, it may fail to power on.
WI-2Pa
