Abit VT7, User Manual

Page: 41 / 86

BIOS Setup 3-3
Multiplier Factor:
This item sets the multiplier factor for the CPU you installed.
NOTE:
Some processors might have this multiplier factor locked, so there is no way to choose a higher
multiplier factor.
Estimated new CPU clock:
This item displays the clock frequency sum up from the previous items [Ext. Clock] and [Multiplier
Factor].
DRAM/PCI Ratio:
This item determines the frequency ratio between [DRAM] and [PCI].
When set to [By SPD], the BIOS will read the DRAM module SPD data and automatically set the DRAM
clock by the value stored in it.
AGP Ratio (CPU:AGP:PCI):
This item determines the frequency ratio among [CPU], [AGP], and [PCI].
New CPU/DDR/AGP/PCI Clk:
This item displays the clock frequency of the previous setting among [CPU], [DDR], [AGP], and [PCI].
Voltages Control:
This option allows you to switch between CPU default and user-defined voltages. Leave this setting to
default unless the current CPU type and voltage setting cannot be detected or is not correct. The option
“
User Define
” enables you to select the Core Voltage manually.
CPU Core Voltage:
This item selects the CPU core voltage.
ATTENTION:
A wrong voltage setting may cause the system unstable or even damage the CPU. Please
leave it to default settings unless you are fully aware of its consequences.
DRAM Voltage:
This item selects the voltage for DRAM slot.
AGP Voltage:
This item selects the voltage for AGP slot.
User’s Manual