Abit Vi7, User Manual

Page: 52 / 80

3-16 Chapter 3
3-6. Power Management Setup
ACPI Suspend Type:
This item selects the type of Suspend mode.
[S1(PowerOn Suspend)]: Enables the Power On Suspend function.
[S3(Suspend To RAM)]: Enables the Suspend to RAM function.
Power Button Function:
This item selects the method of powering off your system:
[Delay 4 Sec.]:
Pushing the power button for more than 4 seconds will power off the system. This will
prevent the system from powering off in case you accidentally hit or pushed the power button.
[Instant-Off]: Pressing and then releasing the power button at once will immediately power off the
system.
Run VGABIOS if S3 Resume:
Three options are available: Auto Yes No. The default setting is Auto . This item can let you choose
when S3 resume active, the VGA BIOS need to be initiative or not.
Restore On AC Power Loss:
This item selects the system action after an AC power failure.
[Power Off]:
When power returns after an AC power failure, the system’s power remains off. You must
press the Power button to power-on the system.
[Power On]:
When power returns after an AC power failure, the system’s power will be powered on
automatically.
[Last State]:
When power returns after an AC power failure, the system will return to the state where you
left off before power failure occurs. If the system’s power is off when AC power failure occurs, it will
remain off when power returns. If the system’s power is on when AC power failure occurs, the system
will power-on when power returns.
VI7