Abit SD7-533, User Manual

Page: 7 / 90

Introduction of SD7-533 Features
User’s Manual
1-3
7. Miscellaneous
!
ATX form factor
!
One AGP slot, five PCI slots
!
Built-in IrDA TX/RX header
!
Two built-in SM-Bus header
!
Hardware monitoring
：
Included fan speed, voltages, processor and system environment temperature
!
Board size: 305 * 230mm
#
The Switching Power Supply must meet ATX 2.03 specification with ATX12V1 Power
connector.
#
Supports Wake On LAN, Modem, but your ATX power supply 5V standby power must be
able to provide at least a 720mA current capacity. Otherwise, the functions may not work
normally.
#
This motherboard supports the standard bus speeds of 66MHz/100MHz/133MHz that are used
by specific PCI, processor and chipset specifications. Exceeding these standard bus speeds is
not guaranteed due to the specific component specifications.
#
Specifications and information contained in this manual are subject to change without notice.
Note
All brand names and trademarks are the property of their respective owners.
1-3. Item Checklist
Check that your package is complete. If you discover any damaged or missing items, please contact your
retailer or dealer.
$
One ABIT SD7-533 Motherboard
$
One 80-wire/40-pin ribbon cable for master and slave Ultra DMA 100, Ultra DMA 66 or Ultra DMA
33 IDE devices
$
One ribbon cable for 3.5” floppy disk devices
$
One compact disc for support drivers and utilities
%
One CA-20 back panel plate with cables (Optional)
$
One user’s manual for the motherboard