Abit NV8, User Manual

Page: 42 / 72

3-16 Chapter 3
3-6. Power Management Setup
Phoenix – AwardBIOS CMOS Setup Utility
Power Management Setup
ACPI Suspend Type S3(Suspend-to-RAM) Item Help
- USB Resume from S3 Disabled
Power Button Function Instant-Off
Wake-Up by PME# of PCI Disabled
Wake-Up by Ring Disabled
Wake-Up by OnChip LAN Enabled
Wake-Up by Alarm Disabled
X - Date(of Month) Alarm 0
X - Time (hh:mm:ss) Alarm 0 : 0 : 0
POWER ON Function BUTTON ONLY
X - KB Power ON Password Enter
X - Hot Key Power ON Ctrl-F1
Restore on AC Power Loss Power Off
↑↓
:Move Enter:/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
ACPI Suspend Type:
This item selects the type of Suspend mode.
[S1(PowerOn-Suspend)]: Enables the Power On Suspend function.
[S3(Suspend-To-RAM)]: Enables the Suspend to RAM function.
! USB Resume from S3:
Two options are available: Disabled or Enabled. The default setting is Disabled . When set to Enabled ,
any event related to onchip USB will power on the system. This item can be configured only if the item
“ACPI Suspend Type” is set to [S3(STR)].
Power Button Function:
Two options are available: Delay 4 Sec or Instant-Off. The default setting is Instant-Off . It is activated
when the user presses the power button for more than four seconds while the system is in the working
state, then the system will transition to the soft-off (Power off by software). This is called the power
button over-ride.
Wakeup by PME# of PCI:
Two options are available: Disabled or Enabled. The default setting is Enabled . When set to Enabled , any
event related to PCI cards (PME) will power on the system.
Wake-Up by Ring:
Two options are available: Disabled or Enabled. The default setting is Disabled . When set to Enabled ,
any event affecting from Modem Ring will awaken a system that has powered down.
NV8