3-16
Chapter 3
USB Mouse Support Via:
This item allows you to select [
BIOS
] for using USB mouse in DOS environment, or [
OS
] in OS
environment.
USB 2.0 Controller:
This option enables or disables the USB 2.0 controller.
Back to Integrated Peripherals Setup Menu:
SuperIO Device:
Click <Enter> key to enter its submenu:
Onboard Serial Port 1:
This is used to specify the I/O address and IRQ of Serial Port 1. Six options are available: Disabled
3F8/IRQ4
2F8/IRQ3
3E8/IRQ4
2E8/IRQ3
AUTO. The default setting is
3F8/IRQ4
.
Onboard Parallel Port:
Sets the I/O address and IRQ of the onboard parallel port. Four options are available: Disable
378/IRQ7
278/IRQ5
3BC/IRQ7. Default setting is
378/IRQ7
.
Parallel Port Mode:
Four options are available: SPP
EPP
ECP
ECP+EPP. The default setting
is
ECP+EPP
mode.
EPP Mode Select:
Two options are available: EPP1.7
EPP1.9. The default setting is
EPP 1.7
. When
the mode selected for the parallel port mode is EPP, the two EPP version options are available.
ECP Mode Use DMA:
Two options are available: 1
3. The default setting is
3
. When the mode
selected for the parallel port mode is ECP, the DMA channel selected can be Channel 1 or Channel 3.
Back to Integrated Peripherals Setup Menu:
Init Display First:
This item selects to initialize AGP or PCI Slot first when the system boots.
[AGP]:
When the system boots, it will first initialize AGP.
[PCI Slot]:
When the system boots, it will first initialize PCI.
KV7 Series
