Abit KR7A-133R, User Manual

Page: 42 / 104

Chapter 3
KR7A-133/KR7A-133R
3-14
DRAM Clock/Drive Control:
This item can let you set several items concerning the DRAM parameters. If you do not understand what
each item does, please keep the default settings. Wrong settings may cause system unstablity, data loss or
even prevent boot up!
Figure 3-5B. DRAM Clock/Drive Control Screen
Current FSB Frequency:
This item will show you the current system front side bus speed.
Current DRAM Frequency:
This item will show you the current DRAM bus speed.
DRAM Clock:
Three options are available: 100 MHz
)
133 MHz
)
By SPD. The default setting is By SPD . You can
set the DRAM running speed, but if your DRAM module does not support the set speed, the system may
be unstable or unable to boot up! If you set to “
By SPD
”, the BIOS will read the DRAM module SPD
data and automatically set the DRAM running speed to the value stored in it.