Abit IX48 GT3, User Manual

Page: 31 / 88

BIOS Setup
IX48 GT3 2-5
ABIT EQ Beep Control
This item controls if the beeper sounds or not when any warning event occurred.
LED Effect Control
This item selects the displaying mode for all the LEDs located at the bottom side of the
motherboard.
[All OFF]: All the LED lights off.
[All ON]: All the LED lights on without any flashing effect.
[MODE 1 ~ MODE 7]: All the LED lights on with the flashing effect by one of these modes.
Temperature Monitoring
Click <Enter> key to enter its submenu:
μ Guru Utility v1.01C
ABIT EQ
Temperature Monitoring
Reading Shutdown
Enable
Shutdown
Temp.
Beep
Enable
Beep
Temp.
(*) CPU Temperature 38 ° C/100 ° F (*) 85 ° /185 ° F (*) 75 ° C/167 ° F
(*) System Temperature 35 ° C/95 ° F ( ) 65 ° ° C/149 ° F (*) 55 ° C/131 ° F
(*) PWM Phase1 Temperature 44 ° C/111 ° F ( ) 90 °
°
C/194 ° F (*) 80 ° C/176 ° F
(*) PWM Phase2 Temperature 47
°
C/116
°
F ( ) 135
°
° C/275
°
F (*) 125
°
C/257
°
F
(*) PWM Phase3 Temperature 48 ° C/118 ° F ( ) 135 °
°
C/275 ° F (*) 125 ° C/257 ° F
(*) PWM Phase4 Temperature 46
°
C/114
°
F ( ) 135
°
° C/275
°
F (*) 125
°
C/257
°
F
(*) PWM Phase5 Temperature 45 ° C/113 ° F ( ) 135 °
°
C/275 ° F (*) 125 ° C/257 ° F
PWM Average Current 14A
PWM Peak Current 14A
‚€
:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit
CPU/System/PWM Phase1~5 Temperature/PWM Average, Peak Current
These items display the temperature of CPU, System, and Power Module. Both the average and
peak current of PWM will be displayed as well.
- Shutdown Enable
Use <Space> key to enable system shutdown function. If the CPU/System/PWM’s temperature
exceeds the shutdown temperature limit, the system will shutdown automatically.
- Shutdown Temp.
This item sets the temperature that will shutdown the system automatically in order to prevent
system overheating.
- Beep Enable
Use <Space> key to enable warning beeps function. Once the system has detected that the
CPU/System/PWM’s temperature exceeded the beep temperature limit, warning beeps will
sound.
- Beep Temp.
This item selects the warning temperature limit.
※
The shutdown temperature must be set higher than the warning temperature.