BIOS Setup
3-15
[Keyboard 98]: Use the power-on button on the “Keyboard 98” compatible keyboard
to power on the system.
NOTE:
The mouse wake up function can only be used with the PS/2 mouse, not with
the COM port or USB type. Some PS/2 mice cannot wake up the system because of
compatible problems. If the specs of your keyboard are too old, it may fail to power
on.
KB Power ON Password
This item sets the password required in order to power on your computer.
NOTE:
Do not forget your password, or you will have to clear the CMOS and reset
all parameters in order to utilize this function again.
Hot Key Power ON
This item powers on the system by pressing <Ctrl> key plus one of each function key
(<F1> ~ <F12>) simultaneously.
Onboard FDD Controller
This item enables or disables the onboard FDD controller.
Onboard Serial Port 1
This item determines which I/O addresses the onboard Serial Port 1 controller will
access.
[Auto]: The system automatically select an I/O address for the onboard Serial Port 1.
[3F8/IRQ4, 2F8/IRQ3, 3E8/IRQ4, 2E8/IRQ3]: Allows you to manually select an I/O
address for the onboard Serial Port 1.
[Disabled]: Disables the onboard Serial Port 1.
Onboard Parallel Port
This item specifies the I/O address used by the parallel port.
[Disabled]: This option prevents the parallel port from accessing any system resources.
When the value of this option is set to [Disabled], the printer port becomes
unavailable.
[378/IRQ7]: This option allows the parallel port to use [378/IRQ7] as its I/O port
address. The majority of parallel ports on computer systems use IRQ7 and I/O Port
378H as the standard setting.
[278/IRQ5]: This option allows the parallel port to use [278/IRQ5] as its I/O port
address.
User’s Manual
