background image

 

I-S71 

iii 

Contents

 

1. Hardware Setup ................................................ 1

 

1.1 Specifications .............................................................1

 

1.2 Choosing a Computer Chassis......................................2

 

1.3 Installing Motherboard................................................2

 

1.4 Checking Jumper Settings ...........................................3

 

1.4.1 CMOS Memory Clearing Header and Backup 
Battery ......................................................................3

 

1.5 Connecting Chassis Components .................................4

 

1.5.1 ATX Power Connectors .......................................4

 

1.5.2 Front Panel Switches and Indicators Headers.......5

 

1.5.3 FAN Power Connectors.......................................5

 

1.6 Installing Hardware ....................................................6

 

1.6.1 CPU Socket 775 .................................................6

 

1.6.2 DDR2 Memory Slots ...........................................8

 

1.7 Connecting Peripheral Devices.....................................9

 

1.7.1 Floppy and IDE Disk Drive Connectors.................9

 

1.7.2 Serial ATA Connectors........................................9

 

1.7.3 Additional USB 2.0 Port Headers .......................10

 

1.7.4 Internal Audio Connectors ................................10

 

1.7.5 Front Panel Audio Connection Header ...............11

 

1.7.6 PCI and PCI Express X16, X1 Slots....................11

 

1.8 Connecting Rear Panel I/O Devices............................12

 

2. BIOS Setup ...................................................... 13

 

3. Driver & Utility ................................................ 14

 

4. Appendix ......................................................... 15

 

4.1 

規格(繁體中文)

....................................................15

 

4.2 

规格(简体中文)

....................................................16

 

4.3 Troubleshooting (How to Get Technical Support?) ......17

 

4.3.1 Q & A..............................................................17

 

4.3.2 Technical Support Form....................................18

 

4.4 Contact Information..................................................19

 

 

Summary of Contents for I-S71

























Reviews: