Abit AN7, User Manual

Page: 58 / 88

3-16 Chapter 3
3-6. Power Management Setup
ACPI Suspend Type:
This item selects the type of Suspend mode.
[S1(PowerOn-Suspend)]: Enables the Power On Suspend function.
[S3(Suspend-To-RAM)]: Enables the Suspend to RAM function.
Power Button Function:
This item selects the method of powering off your system:
[Instant-Off]: Pressing and then releasing the power button at once will immediately power off the
system.
[Delay 4 Sec.]: Pushing the power button for more than 4 seconds will power off the system. This will
prevent the system from powering off in case you accidentally hit or pushed the power button.
Wakeup by PME# of PCI:
Two options are available: Disabled or Enabled. The default setting is Disabled . When set to Enabled ,
any event affecting from PCI card (PME) will awaken a system that has powered down.
Wakeup by Ring:
Two options are available: Disabled or Enabled. The default setting is Disabled . When set to Enabled ,
any event affecting from Modem Ring will awaken a system that has powered down.
Wakeup by Alarm:
Two options are available: Disabled or Enabled. The default setting is Disabled . When set to Enabled ,
you can set the date and time at which the RTC (real-time clock) alarm awakens the system from Suspend
mode.
Day of Month Alarm/ Time (hh:mm:ss) Alarm:
You can set the Date (month) Alarm and Time Alarm (hh:mm:ss). Any event occurring will awaken a
system that has powered down.
AN7