Abit AMD Athlon 64 System Board Socket 754 Page 44 User Manual Download

Page: 44 / 48

4-2

Chapter 4

4-1. Setup Items

Drivers:

•

VIA 4in1 Driver

Install the VIA 4-in-1 driver for Windows Operating System.

•

VIA VGA Driver

Install the VIA VGA graphic driver for Windows Operating System.

•

Audio Driver

Install the audio driver for Windows Operating System.

•

LAN Driver

Install the LAN driver for Windows Operating System.

•

VIA USB 2.0 Driver

(1) Install the VIA USB 2.0 driver for Windows 98/ME Operating System.
(2) The installation of USB 2.0 driver for Windows XP or Windows 2000 is currently available
by updating the latest service pack from Microsoft’s website.

•

VIA South Bridge SATA RAID Driver

Install the VIA Serial ATA RAID driver for Windows Operating System.

•

AMD Cool’n’Quiet Driver

Install the AMD Athlon 64 Processor driver for Windows Operating System.

Manual:

•

View the

user’s

manual in PDF file.

Utility:

•

Click to enter

the

sub-screen for installing software like Award Flash, Acrobat Reader, DirectX,

and LoFormat utility.

ABIT

Utility:

•

This model does not support ABIT Utility.

Browse

CD:

•

Browse the

contents

of this CD-ROM.

Close:

•

Exit the CD setup

Items

Menu.

KV-85

Summary of Contents for AMD Athlon 64 System Board Socket 754

















































Search results

Summary of Contents for AMD Athlon 64 System Board Socket 754

Reviews:

Related manuals for AMD Athlon 64 System Board Socket 754

Brands by name

Popular brands

Abit AMD Athlon 64 System Board Socket 754, User Manual

Search results

Summary of Contents for AMD Athlon 64 System Board Socket 754

Reviews:

Related manuals for AMD Athlon 64 System Board Socket 754

Brands by name

Popular brands