Abit AB-BH6, User Manual

Page: 57 / 98

Quick Installation A-1
Appendix A Quick Installation
Appendix A will give you a simplified installation procedure, in order to allow
you to install your motherboard quickly and correctly.
If you need further information or if you need to change some other settings,
start reading from Chapter 1.
Mount the retention mechanism onto Slot 1, then fix the screw on the four
corners of the mechanism. Slightly and gently insert the Pentium
®
II/III
processor into the retention base, make sure all the components are affixed
securely.
According to your CPU speed, set up the CPU in the CPU SOFT MENU
™
II
of the BIOS SETUP.
DIMM 1 ~ DIMM 3
Watch the pin position and the orientation
FDC: Connect one end of the 34-pin cable that comes with the drive to the
FDD connector, and the other end of the cable to the FDC pin connector on the
motherboard.
Note: Be sure that the red line on the cable connects to the first pin of the
connectors.
Watch the pin position and the orientation
IDE1 (Primary IDE): Connect one end of the 40-pin cable that comes with the
drive to the HDD connector, and the other end to IDE1 pin connector on the
motherboard.
Note: Be sure that the red line on the cable connects to the first pin of the
connectors.
Installing the CPU
Adjusting CPU speed
Installing DRAM
Installing FDD
Installing HDD