manualshive.com logo in svg

Abit AA8XE, User Manual

Share
Download
Abit AA8XE User Manual Download Page 55

Install Intel Chipset Software Utility 

A-1 

Appendix A.  Install Intel Chipset Software Utility 

NOTE:

 Please install this Intel Chipset driver first after having installed the Windows operating system. 

 

The installation procedures and screen shots in 
this section are based on Windows XP operating 
system. For those of other OS, please follow its 
on-screen instruction. 

Insert the Driver & Utility CD into CD-ROM 
drive, it should execute the installation program 
automatically. If not, double-click the execution 
file at the main directory of this CD to enter the 
installation menu. 

After entering the installation menu, move your 
curser to [Drivers] tab. Click [Intel Chipset 
Software Installation Utility]. The following 
screen appears. 

 

1. 

Click [Next]. 

 

2. 

Click [Yes]. 

 

Click [Next]. 

3. 

 

4. 

Choose [Yes, I want to restart my computer 

now.], and click [Finish] to complete setup. 

User’s Manual 

Summary of Contents for AA8XE

















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands