ROLManual rev.092914
10
Position your document as described above. Press the Scan Button once
– you will
hear a shutter sound. The ROL will start reading the text almost immediately after that.
Do not press any other buttons until the device starts reading, as it will interrupt the
scanning/reading process.
Please note:
If you are scanning a small object with fine print, place it under the right
camera only and, when pressing the scan button, hold the scan button for two seconds
before releasing it to achieve the best focus.
Reading Speed:
To temporarily control the speed in which the document is read aloud, simply scroll the
Left Roller up or down. The reading speed can also be set through the Settings menu.
To change and set the Reading speed from the Settings, begin at the Main Menu.
Scroll to and select Settings. Next, scroll to and select General Settings. Then, scroll to
and select Reading Speed. Next, scroll between the speed values from 1 (the slowest)
to 10 (the fastest). Stop at the speed value you prefer and set it with the Action Button.
Voice/Language:
To adjust the setting for your preferred reading voice or language, from the Main Menu,
scroll to and select Settings. Then, scroll to and select General Settings. Next, scroll to
and select
Reading Voice.*
Then, scroll through available language/voice
combinations and select your preference.
The reading language and language of the document need to match in order for the
text recognition to be accurate.
*Please note:
There is also a setting that is labeled
Voice
rather than
Reading Voice
.
The
Voice
setting is to choose the voice that will be used for announcing Menu options
and prompts on the device, whereas the
Reading Voice
will be the language of the
content you are reading.
To Navigate Through Text:
The five Daisy Buttons and Right Roller are used for text navigation.
Press the
left or right arrow button
to, respectively, move to the previous or
next word.
Press the
up or down arrow buttons
to, respectively, move to the previous or
