5
OWNER’S MANUAL
Thank you for purchasing MICRO1. Before you begin using your new massaging belt, please
read this operation manual carefully to learn about the correct method of usage. Please pay
special attention to the safety section of this booklet. KEEP THIS MANUAL FOR FURTHER
REFERENCE.
IMPORTANT SAFETY INFORMATION
This product has been designed for home use only and built for optimum safety. Please
note the following safety precautions:
1.
Before starting any exercise program you should consult your doctor to determine if you
have any physical or health conditions that could create a risk to your health and safety, or
prevent you from using the equipment properly. Your doctor's advice is essential if
you:
are on medication or feeling unwell,
have malignant tumors,
suffer from heart diseases,
are pregnant or in menstruation,
have spinal disorders or others, caused by a past accident or sickness,
have pains in your back,
have a high temperature.
2.
Do not use the product in an excessively humid or dusty environment.
3.
Do not use the product in temperatures higher than 40ºC.
4.
Do not expose the product to heaters, stoves or direct sunlight.
5.
The safety level of the equipment can only be maintained if it is regularly examined for
damage and/or wear and tear.
6.
Always use the equipment as indicated. If you find any defective components whilst
assembling or checking the equipment, or if you hear any unusual noise coming from the
equipment while using, stop. Do not use the equipment until the problem has been
rectified.
7.
The equipment is designed for adult use only. Children may use the belt only under adults’
supervision and on their sole responsibility.
!
If you use the product in a cold place, do not increase the room temperature
abruptly. It is recommended that you increase the temperature gradually to a normal level.
If the belt is stored in a cold place and then brought to a warm environment, it is advisable
to wait one hour before use. It is because due to the process of condensation, water
droplets may appear on the electronic parts, which may result in mechanism malfunction.
Summary of Contents for MICRO1
Page 1: ......
