06
• Connect the power supply to the mains and check the operation of the motors. If there is no
function, check all connections are secure and the LED light is lit on the handset.
• Ensure the security key is plugged into the socket on the side of the handset. Using the
handset raise the bed to its full height and switch off the power to avoid any accidental
movement during the next procedure.
• Take one of the seat rail sliders and locate it in the rail at the side of the bed-end while
depressing the bottom side rail adjustment button.
• Fully insert the slider (pointed end up) until it locates in its lowest position. Fit both side rails to
the slider with the rounded edge to the top. The other ends of the rails should rest on the floor.
• Take another slider and fit it to the other end of the bed rails. Depress the adjustment button
and locate the slider in the rail on the bed-end.
• Repeat the process for the other side rail.
Assembly and Operation