AI IP Camera Quick Start Guide
2.11 Cable connection
2.11-1 For safety precautions
The lightning arrester must be installed and grounded if you install camera
outdoor.
Strong and weak current cables must be kept at least 5 cm apart from each
other. When connecting the cables to the device, take care to avoid
connecting strong current cables to weak current interfaces or you will
damage your device.
The tail of cable must be cut if it cannot pass through the wall, please keep
the label on tail of cable. And please make sure to use insulating tape and
waterproof tape to insulate and waterproof all tail of cable to avoid short
circuits and water leakage.
Wrap all pigtail cables in insulated, waterproof, rubber tape to prevent short
circuits or water damage.
