Ability Research AbilitySpeaker User Manual And Instructions Download Page 11

2.Sound through the pillow speaker is ok but no sound through the AbilitySpeaker.

Make sure there are messages recorded (prompts will only play through the pillow
speaker).  Make sure the connectors on the cable from the AbilitySpeaker are plugged
into the proper connectors on the ActionVoice.  Make sure you have an ActionVoice-
2A and that it is setup with OPTION 2 and AUDITORY MODE on.

3.Not Loud Enough.  Turn up the volume control on the bottom of the ActionVoice.

Make sure the pillow speaker volume control (on the pillow speaker) is turned up.
Make sure your messages and prompts are recorded loud enough.  There is a limit on
how loud the sound can be, so you may need to use an amplified speaker (which is NOT
compatible with the AbilitySpeaker system).

4.Other problems related to scanning and playing of prompts or messages.  The

AbilitySpeaker is fairly simple and other problems will most likely be related to setup of
the ActionVoice.  Check operation without the AbilitySpeaker connected (unplug both
connectors from the ActionVoice).  If operation is not what you’d expect, you must first
set up the ActionVoice and resolve this before checking the AbilitySpeaker further.  See
the ActionVoice manual  for more information.  

APPENDIX C.  Care and Cleaning of the AbilitySpeaker

The AbilitySpeaker should require no preventative maintenance other than cleaning.  To
clean the AbilitySpeaker, use a damp cloth and wipe gently over the surface.  Do not get
water or other liquids inside the case.  NEVER IMMERSE THE ABILITYSPEAKER
OR PILLOW SPEAKER IN WATER.  Do not use chemicals or abrasive cleaners or
scrubbers.

                                                                                                                                  

10

APPENDICES

Summary of Contents for AbilitySpeaker
















Reviews: