ELEKTRONICZNY ZAMEK HOTELOWY 6536M-6SA
*
Installation Guide
Note: the appearance of lock in the pictures may be not the
same with the real model, but the installation is the same.
ft!Y'
0
Lock mechanism
4.2X25 screw
Front plate
4X6 screw
Follow te,nplate instructions:
Door
(1).Put plug C to the outside through the door hole, and inser t
the lock mechanism into the doorframe, then fasten with 2 pi
eces of 4 .2X25 screws. Then install cylinder into the mortise
by two screws.Cover the front plate on it and fasten with 2 pi
eces of 4X6 screws.
R@
i
l
ine
Tomorrow's Technology. To,;lay
Knob
spindle
Handle
spindle
(e)
Fron� lock
@
housing
J
Key cover
(2). Connect plug C with socket A, and connect wire B with
D, then insert the two handle spindle into the holes of front
and back handles respectively, regarding 1he knob spindle ,
please put the longer part into the small hole of back lock
housing. While attaching the front and back lock housing to
the door, make sure the cylinder on the right position. Then
fasten the back and front lock body with 4 pieces of
M5X55
screws. After installation, turn handle to make sure the lat
ches and deadbolt work smoothly, the lock works properly
with opening card. If no problem, put a key cover to cover
the cylinder.
