24
OPERATION
Workout setting
-
Press MODE/ENTER key to select the function of TIME, DISTANCE, CALORIES and
PULSE. Use SET Key for setting and press MODE/ENTER key for confirmation.
-
For instance the time set
‐
up, when the time value is blinking, you can use SET Key to
adjust the number. Press MODE/ENTER key for confirmation and skip to next set
‐
up. The
set
‐
up of DISTANCE, CALORIES and PULSE is the same as the TIME set
‐
up.
-
Once the workout begins and the console picks up the exercise signal, the value of
SPEED/RPM, TIME, DST and CAL will count up on the display.
Recovery
1. The RECOVERY key will only be valid if pulse is detected.
2. TIME will show "0:60" (seconds) and counts down to 0.
Computer will show F1 to F6 after the countdown to test heart rate recovery status. User can find
the heart rate recovery level based on the chart below.
3. Press RECOVERY key again to return to the beginning.
F1
Outstanding
F2
Excellent
F3
Good
F4
Fair
F5
Below average
F5
Poor
Trouble shooting
-
When the display of LCS is dim, it means the batteries need to be changed
-
If there is no signal when you pedal, please check if the cable is well connected
Note:
1. When stop training for 4 minutes, the main screen will be off.
2. If the computer displays abnormally, please re-install the batteries and try again
APP
:
1. This console can Connect APP on the smart device by Bluetooth
2. Once console is connected to smart device via Bluetooth, the console will power off.
