Abilia Progress PC, Manual, Page: 10 / 45

10
Scanning Settings
Scanning Methods
Different scanning methods can be used in Progress PC. Selections can be
made between one or two control switches, automatic or manual scanning,
row/column or linear scanning, forced scanning or repetition. The settings
selected when Progress PC is delivered are automatic linear scanning that is
controlled by one control switch.
Note! Progress PC can be adjusted such that it displays only one page at a
time when scanning. In this case, each page should consist of a single button.
See the section
Creating a New Page on Page 15.
The various scanning methods are as follows:

Automatic scanning: Progress PC steps forward automatically following a
press on the control switch.

Manual scanning: Progress PC steps forward one step at a time for each
press of the control switch.

Forced scanning: It is possible to force automatic scanning by pressing the
control switch several times.

Repetition: It is possible to make Progress PC step automatically when using
manual scanning by holding the control switch pressed.

Row/column scanning: This can be either manual or automatic – the principle
is the same in both cases. First, steps are taken row for row and then buttons
along the selected row are stepped.
Scanning
between
rows
Scanning
between
buttons
on a
selected
row