Abilia Gewa Control 18, Manual, Page: 24 / 60

24
This picture shows the various terms and functions which are described in the text.
Symbols
The following symbols appear in the text throughout this manual:
P
Programming button
X
and
Y
Any button on your Control 18
Y
Any button on another transmitter to be programmed
0
-
9
,
*
#
Button 0-9, *, # on Control 18
A B C D
Button A B C D on Control 18
!
Code -button
---
Level -button
---
2 sec
Level -button held pressed for approximately 2 seconds
Inserting Batteries
Unscrew the battery lid screw on the back of Control 18 using a
screwdriver and insert four alkaline LR03 (AAA) 1.5 V batteries.
Insert the batteries according to the marking at the bottom of the
battery compartment. Pay attention to the polarity! It is important to
use long life
alkaline batteries that are protected against leaking
battery acid.
When you have inserted the new batteries, press
P
.
Battery Warning Indicator
Control 18 has a built-in battery warning indicating low battery voltage. A sound signal
with short beeps is heard at an interval of 30 seconds. After a while it starts warning every
ten minutes. Replace the batteries as soon as possible.
Fig 1
Function -buttons
0-9, *, #, A, B, C, D
Indication lights indicating
different levels:
Level 1-5
Programming button
(reset)
Indication lamp when
programming
Code -button
!
Level- button
---
/
Function- button