Maintenance
34
To prepare the product for a new user
1.
In "Settings", tap myAbilia and select "Log out".
2.
On a computer, go to
and disconnect the license from the
current user account.
3.
Create an account for the new user and register the license. Refer to
create a user account at myAbilia and register the license
4.
Install the GEWA Connect application to the new mobile device. Refer to
To install the Multibox and install and configure the GEWA Connect
application
5.
Log in to the mobile device with the new user's myAbilia account.
6.
Create pages and buttons applicable for the new user. Refer to
To update the firmware in the Multibox
When a new update is available, the button "Update Multibox" is enabled in the
"Multibox" menu in GEWA Settings, and the text "Update available" is shown.
1.
Connect the Multibox to the mobile device with an applicable USB cable.
NOTE:
This USB cable is not included. The USB cable must have a
micro USB connector at one end and a connector that is applicable for
your Android mobile device at the other end.
2.
A permission dialogue opens on the mobile device. Tap to approve.
3.
Tap "Update Multibox" and do the instruction steps. The Multibox beeps
one time and the update starts.
CAUTION:
Do not disconnect the USB cable before the firmware
update is finished.
Summary of Contents for GEWA Connect
Page 1: ...GEWA Connect Art nr 461180 461188 EN 7 0 User manual...
Page 2: ......