BAL.0414.0 • 2018-08-01
EN - 15
MB EVO PRO/MB EVO
9 Disposal
8.2 Cleaning the cable assembly
Carry out each step in accordance with the figures below:
1
Disconnect the cable assembly and lay it out straight.
2
Clean the wire conduit from both sides with compressed air.
3
Mount all parts in the reverse sequence.
9 Disposal
WARNING
Risk of injury
Serious injuries can be caused by parts swirling around.
• When cleaning the wire guide with compressed air, wear suitable protective clothing, in
particular safety goggles.
NOTICE
• Replace any damaged, deformed or worn parts.
Fig. 14
Equipping the torch neck
C
D
F
E
A
B
NOTICE
• Do not dispose of the device with household waste.
• For disposal, observe the local regulations, laws, provisions, standards and guidelines.
