EN
-
46
7 Operation
iROB
®
501, iROB
®
401, iROB
®
301
F68: Setting current change values (start welding parameter)
The present value of the start welding parameter can be set in % based on the present value of the welding
parameter.
F69: Setting current change values (end crater parameter)
The present value of the end crater parameter can be set in % based on the present value of the welding
parameter
F77: Assigning the power source ID
If the weld data capture function is used, it assigns an ID to the power source for use in the weld data capture
file name.
F82: Starting pulse time configuration (for aluminum)
Set the pulse time for the start of the arc. Used when starting pulse welding with aluminum wire.
Adjustable range
10 to 300%
Default value
100%
Storage option
No
Description
Defines the current value of the start parameter as a percentage based
on the present welding current.
Adjustable range
10 to 300%
Default value
100%
Storage option
No
Description
Defines the current value of the end crater filling parameter as
a percentage based on the present welding current.
Adjustable range
1 to 999
Default value
1
Storage option
No
Description
Determines the welding power source ID for weld data capture.
Adjustable range
0 to 2 s
Default value
0.3 s
Storage option
No
Description
Defines the time of the pulses at the moment the arc starts.
