Abicor Binzel EWR, Operating Instructions Manual, Page: 29 / 72

BAL.0253.0 • 2017-04-07 EN - 11
EWR 8 Adjusting the outlet stagnation pressure
1 Disconnect the power supply (1) .
2 Press and hold down the ON/OFF button (3) while simultaneously re-
connecting the power supply (1) .
3 The outlet stagnation pressure can be read on the LED indicator.
4 To change the outlet stagnation pressure, use the arrow keys (+/−).
With each LED, the pressure changes by 0.2 bar.
The lowest LED is not included. It indicates that the device is in pressure
mode. (Example: 3 LEDs = 0.4 bar, 6 LEDs = 1.0 bar)
5
Once the desired gas pressure has been set, briefly press the ON/OFF
switch
(3)
.
6 The setting is now saved and the EWR switches to operating mode.
1
Power supply
2 Flow rate indicator
3
ON/OFF button
Fig. 5 Operating the EWR
Fig. 6 Operating the EWR
1 2 3