BRS-CCi
7 Operation
EN - 15
6.10 Connecting the pneumatic system
For the supply line, a compressed air hose with an inner width of min.
ø
6mm is necessary which is inserted
into the angle screw connection at the housing of the cleaning station. A shut-off valve in the supply line is
recommended. This allows the BRS-CCi to be quickly and simply depressurized in order to carry out any
installation and maintenance work.
7 Operation
1
Switch on the robot control.
2
Start the welding process.
3
Stop the welding process.
8 Putting out of operation
1
Switch off the robot control.
9 Maintenance and cleaning
Regular and lasting maintenance and cleaning are the prerequisite of a long life and a trouble-free function.
In doing so, observe the following:
Fig. 12
Connecting the pneumatic system
S1
M
M
S4
Z2
Z1
5
3
1
14
4 2
12
14
5 3
1
12
14
4
2
12
14
5 3
1
12
14
4
2
12
14
12
12
Z3
E
P
V
Compressed air of motor
Clamping cylinder Lifting cylinder
Injector
Shear
unscrew clamp
bottom top
open closed
D8/d6
D6/d4
D8/d6 D6/d4
D6/d4
D6/d4
Y2
Y1
Y4
Y3
6 bar
Drawing from th
bottle
D6/d4
6x1
NOTE
• As the cleaning station BRS-CCi is integrated into a welding system, the operating instructions of the
welding components, such as welding torch and robot control, must be observed during operation.
• Make sure that the cleaning station BRS-CCi is operated with a front sheet only.
NOTE
• As the cleaning station BRS-CCi is integrated into a welding system, putting out of operation depends
on the robot control. Please make sure that the shutdown procedures for all components mounted in
the welding system are strictly observed.
Summary of Contents for BRS-CCi
Page 19: ...BRS CCi 12 Entsorgung DE 19 ...
Page 37: ...BRS CCi 12 Disposal EN 19 ...
