Abicor Binzel ABITIG GRIP 1502, Operating Instructions Manual

Page: 13 / 44

EN - 3
TIG welding torch 1 Identification
1 Identification
The manual welding torches ABITIG
®
GRIP are used in industry and trade for
inert gas welding using tungsten electrodes and inert gases. They are available
as liquid-cooled or air-cooled version.The liquid-cooled model requires a
recirculating cooling unit. They consist of the torch neck with equipment parts
and wearing parts, handle and cable assembly with central connector. They
correspond to the directive EN 60 974-7 and are not considered to be devices
having their own functions. Arc welding can only be carried out in connection
with a welding power supply.
2 Technical Data
Welding - 10 °C to + 40 °C
Transport and storage - 25 °C to + 55 °C
Relative humidity up to 90 % at 20 °C
Tab. 1 Ambient conditions
Type of voltage DC or AC
DC polarity of the electrodes Usually negative
Type of use Hand-held
Voltage limitation 113 V peak value
Max. arc inflammability and stabilization
voltage Breakdown voltage 50 Hz 10 kV
Protection type of the machine side
connections IP3X (EN 60 529)
Shielding gas as per DIN EN ISO 14175
Electrode commercially available tungsten electrodes
suitable for TIG use, preferably low-radiation
Tab. 2 General torch data (EN 60 974-7)