EN - 13
ABIROB
®
A
6 Putting into operation
6.2 Setting up the cable assembly
1
Lay out the cable assembly
straight and attach it to the connection
module
on the torch side.
2
Slide the cut-to-length wire guide from the central connector
up to the
stop in the contact tip and screw into place with the connection nut
.
If required, connect the emergency stop cable
of the CAT robot mount
to the cable assembly
6.4 Connecting the control lead on page EN-14
1
Connection module
2
Emergency stop cable
3
Control lead
4
Central connector
5
Air-blast hose
6
Connection nut
7
Cable assembly
8
CAT robot mount
Fig. 5
Setting up the cable assembly
1
2
3
4
5
6
7
8
NOTICE
• Select the correct wire type and appropriate wire guide for your
application.
• For information on cutting the wire guide to size and correctly assembling
it, please see the following section:
9 Maintenance and cleaning on page EN-17
• Spiral liners = for steel and stainless steels
• PA liners = for aluminium, copper, nickel and stainless steels
Summary of Contents for ABIROB A Series
