ABICAR ADVANCED
6 Putting into operation
EN
-
13
6.2 Adjusting and changing guide arms
By rotating the guide arms, adjustment can take place continuously or incrementally by means of grooves.
The roller units can be mounted on both ends of the guide arms. This means that the distance to the
workpiece can be decreased or increased.
* Accessories
► Mount guide arms to suit your requirements with the knurled screws left and right on the device.
Required tool:
Internal hexagonal spanner SW4
Adjustment for incremental advance
► Mount the guide arms so that the grooves point
outwards.
Adjustment for continuous advance
► Mount the guide arms so that the grooves point
inwards.
Setting the length
► Mount the roller unit on the other side of the guide
arm.
Adjustment of the guide arm for external edges.*
► Adjust the height of the roller using the nuts.
