DO NOT use cream
cleaners or bleach.
These substances are
abrasive.
Regularly clean with
mild liquid detergent
or soap and water.
DO NOT use cleaning
pads with abrasive
sur faces as this may
scratch the material.
INSTALLATION GUIDE
This product must be installed by a licensed plumber.
This is a general installation guide - there are many factors
that are involved that can alter the installation method.
This product install must comply with AS/NZS 3500.
Note: This product must be installed by a licensed tradesperson.
This is a general installation guide - there are many factors that are
involved that can alter the installation method.
INSTALLATION GUIDE
1
Check the desired height of basin from floor.
2
Fit waste and trap to basin.
Note:
ensure trap can reach waste pipe.
3
4
Drill holes into structure within walls with a wood
drill bit and insert fixings. Hook basin onto square
bend hooks.
Note:
Wall plugs only required for masonary walls.
Secure plumbing to basin and wall outlet. Test by
running water through the waste. Silicone top and
sides of basin if necessary.
Extend telescopic trap to reach waste pipe.
Adjust trap up or down to find desired height & cut
waste to suit trap.
Note:
Bottle trap & water tap hose are not able to
be concealed under basin.
5
IN THE
BO
X
2 x Masonary wall plug
2 x Square bend hook
1 x Basin
structure in wall
level
