INSTALLATION GUIDE
This product must be installed by a licensed plumber. This is a general installation guide - there are many
factors involved that can alter the installation method.
AU/NZ: For installations within Australia and New Zealand, this product must be installed in compliance
with AS/NZS 3500.
UK: For installations in the United Kingdom this product must be installed in compliance with the Water
Supply (Water Fittings) Regulations and Water Supply (Water Fittings) (Scotland) Byelaws.
Other: For installations outside these countries, this product must be installed in compliance with the
standards in your respective countr y.
DO NOT use cream
cleaners or bleach.
These substances are
abrasive.
Regularly clean with
mild liquid detergent
or soap and water.
DO NOT use cleaning
pads with abrasive
sur faces as this may
scratch the material.
1
Pull nozzle out from mixer.
Secure hose and unscrew pull-out nozzle
to remove. Obtain the O-ring from between
the hose and nozzle.
1. Insert O-ring into hose.
2. Replace pull out nozzle with
spray attachment.
Tighten spray attachment onto pull-out
hose. O-ring should be in between nozzle
and hose.
1x Spray Attachment
2
3
4
IN THE BOX
